140,00 ر.س
Security Monitor IAM Simplex 4090-9001 has both power and communications that are supplied through a 2-wire 4100ES, 4010ES or 4100U IDNet circuit. It can provide address-specific location of up to 5 initiating devices (such as door or window magnet switch contacts, or comparable security products) by observing the wiring connections of the circuit to normally open or normally closed dry contacts (one kind of IAM). Operation. If you turn on the alarm, it will be “armed” by selection from the control panel for fire alarms for non-working hours, monitoring loop activity (short open, long or unusual) triggers the alarm to be triggered at priority 2 on the panel.
If you turn off the alarm and switch to “disarmed”, such as during normal working hours abnormal and normal conditions will be recorded as incidents. Based on the type of point selected, an open short in the circuit wiring could cause issue that must be reported. Alternatively, an event that is short could be recorded as an event.
The addressable Module commonly referred to as IAM is a crucial element in fire alarm systems that are designed to maximize the detection and control of fire. The module is able to receive communications and power via two wires of MAPNET II, or IDNet circuit, which guarantees exact location-specific addressability. It monitors the individual initiating devices, such as single-station smoking detectors alarm contacts as well as heat detector contacts. It is able to monitor multiple devices in the same time, monitoring normally dry contacts that are open and wiring integrity up to a resistor at the end of the line.
Go to store.
| Weight | 0,56 kg |
|---|---|
| Dimensions | 22,86 × 10,16 × 20,32 cm |
